用戶不同，對于C型鋼壁的厚度要求也是不同的，如果要同時滿足這些要求的話，所選用的C型鋼生產工藝和設備非常關鍵。下面濟南C型鋼就給大家說一下將C型鋼的壁厚控制的均勻合理的方法！

Different users have different thickness requirements for C-section steel wall. If these requirements are to be met at the same time, the production process and equipment of the selected C-section steel are very critical. Next, Jinan C-section steel will tell you how to control the wall thickness of C-section steel uniformly and reasonably!

材料從C型鋼機的尾部進入之后，經過各種壓輥的壓制，然后從頭部輸出成型后的C型鋼。這不僅使得必要的生產加工工藝得到了極大的優化，同時提高了生產下來，還能保證C型鋼產品具有均勻的壁厚和復雜的界面形狀。

After the material enters from the tail of the C-section steel machine, it is pressed by various rollers, and then the formed C-section steel is exported from the head. This not only greatly optimizes the necessary production and processing technology, but also improves the production. It also ensures that C-section steel products have uniform wall thickness and complex interface shape.

為了達到準確的壁厚，C型鋼機在壓制C型鋼的時候，使用的模具是由一個精準的上模和一些大小規格尺寸相同的下模構成的。在加工之前將它們安裝到位，不僅要保證上模與下模能夠順利的，還得確保四周邊間隙均勻，這樣壓制的C型鋼才能壁厚均勻。

In order to achieve accurate wall thickness, when pressing C-section steel, the die used by C-section steel machine is composed of a precise upper die and some lower dies of the same size and size. Installing them in place before processing not only ensures the smooth operation of upper and lower dies, but also ensures the uniform clearance around them, so that the wall thickness of pressed C-section steel can be uniform.

C型鋼加工的時候，模具安裝及主機試車，然后開啟空氣壓縮機、真空泵、擠出機、切瓦機、放料機、壓瓦機、主機及瓦托輸送機；泊車時，先休止擠出機，再休止其余設備。

When C-section steel is processed, the die is installed and the main engine is tested. Then the air compressor, vacuum pump, extruder, tile cutter, feeder, tile press, main engine and tile conveyor are opened. When parking, the extruder is stopped first, and the rest of the equipment is stopped.

在設備使用前，要檢查各處連接是否牢靠，安裝螺栓、螺母是否擰緊，左右機箱內應加足潤滑機油，才能通電啟念頭器進行試車。擠出機擠出的泥坯，經切割機切成定長，由滾子輸送機送至壓瓦機，由裝料器按劃定程序送至下模，C型鋼機壓出的瓦坯在工作臺轉位后，由卸瓦機的真空吸盤吸取并轉位放置在輸送線的瓦托上。

Before using the equipment, it is necessary to check whether the connections are reliable, whether the bolts and nuts are tightened, and lubricating oil should be added in the left and right chassis, in order to turn on the power to start the idealizer for test run. The mud blank extruded by extruder is cut into fixed length by cutting machine and sent to tile press by roller conveyor. The material loader is sent to the lower die according to the specified procedure. The tile blank extruded by C-section steel machine is absorbed by vacuum sucker of tile unloader and placed on the tile bracket of the conveyor line after the worktable is rotated.

C型鋼機制造出的C型鋼壁厚可以制得很薄，而且大大簡化了出產工藝，進步出產效率?？梢猿霎a用一般熱軋方法難以出產的壁厚平均但截面外形復雜的各種型材和不同材質的冷彎型彩鋼設備。

The wall thickness of C-section steel produced by C-section steel machine can be very thin, and the production process is greatly simplified, and the production efficiency is improved. It can produce all kinds of profiles and cold-formed color steel equipment with complex cross-section shape and average wall thickness which are difficult to produce by common hot rolling method.

感謝您的閱讀與觀看，本文的精彩內容來自：濟南C型鋼，我們會有更多的精彩內容繼續為您呈現，詳情請點擊：http://www.atvolunteers.com

Thank you for your reading and watching. The wonderful content of this article comes from Jinan C-section steel. We will continue to present more wonderful contents for you. For more details, please click on http://www.atvolunteers.com.